PROMATECT®-L500

  • Non-combustible
  • Lightweight
  • Moisture resistant
  • Rot

Вогнезахисна плита PROMATECT ® - L500 - являє собою легку силікатну вогнезахисну плиту, несприйнятливу до вологи (не набухає), великоформатну і самонесучу, вироблену з контролем якості продукції на всіх виробничих етапах згідно з (ISO 9001).

Плита PROMATECT ® - L500 призначена для конструктивного протипожежного захисту будівель і споруд у всіх секторах будівництва, в тому числі:

  • для вогнезахисту несучих металоконструкцій до 180 хвилин;
  • для виготовлення протипожежних перегородок з межею вогнестійкості 180 хвилин.

< #Back#
Alkalinity

9pH (approximate)

Bending Strength Break

3N/mm² Average, dry

Bending Strength Longitudinal

3N/mm²

Compressive Strength

5.5N/mm² (perpendicular to the surface)

Dry Density

500kg/m³

Nominal Dry Density

500kg/m³

Короткий опис Вогнезахисна плита для конструктивного захисту сталевих конструкцій та інженерних мереж
Flexural Strength Rupture

Average, dry

Реакція на вогонь Non-combustible
Bending Strength Break

3N/mm² Average, dry

Moisture Content

3% - 5% (at EMC*).
*EMC=Equilibrium moisture content

Moisture Diffusion Resistance

3.2μ

Tensile Strength Longitudinal

1.2N/mm²

Thermal Conductivity @ 20 °C 0.09 W/m°K
Thermal Conductivity @ 20 °C 0.09 W/m°K
Water Absorbency

0.77g/cm³

Alkalinity

9pH (approximate)

Bending Strength Break

3N/mm² Average, dry

Bending Strength Longitudinal

3N/mm²

Compressive Strength

5.5N/mm² (perpendicular to the surface)

Dry Density

500kg/m³

Nominal Dry Density

500kg/m³

Короткий опис Вогнезахисна плита для конструктивного захисту сталевих конструкцій та інженерних мереж
Flexural Strength Rupture

Average, dry

Реакція на вогонь Non-combustible
Bending Strength Break

3N/mm² Average, dry

Moisture Content

3% - 5% (at EMC*).
*EMC=Equilibrium moisture content

Moisture Diffusion Resistance

3.2μ

Tensile Strength Longitudinal

1.2N/mm²

Thermal Conductivity @ 20 °C 0.09 W/m°K
Thermal Conductivity @ 20 °C 0.09 W/m°K
Water Absorbency

0.77g/cm³

EMC = Equilibrium moisture content

< #Back#
Реакція на вогонь Non-combustible
Processing

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

Waste Disposal Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.
Реакція на вогонь Non-combustible
Processing

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

Waste Disposal Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

< #Back#

Quality Assurance

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Quality Assurance

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

< #Back#

Processing

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

Processing

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.