PROMATECT®-L500

Преимущества

  • Non-combustible
  • Lightweight
  • Moisture resistant
  • Rot

PROMATECT®-L500 is a lightweight mineral matrix engineered board which is off-white/beige in colour and has a smooth sanded surface on one face with a lightly honeycombed texture on the reverse face. PROMATECT®-L500 is resistant to the effects of moisture and will not physically deteriorate when used in damp or humid conditions. Performance characteristics are not degraded by age or moisture. Untreated surfaces will absorb water which can cause some loss of strength but strength is regained after drying. PROMATECT®-L500 does not encourage mould growth and is resistant to attack by vermin. PROMATECT®-L500 is chemically inert and is resistant to diluted acids and alkalis. Boards should be protected where high chemical concentrations are likely to occur.

< #Back#
Щелочность

9pH (approximate)

Прочность на изгиб

3N/mm² Average, dry

Прочность при изгибе по длине плиты

3N/mm²

Сопротивление сжатию

5.5N/mm² (perpendicular to the surface)

Dry Density

500kg/m³

Nominal Dry Density

500kg/m³

Краткое описание Non-combustible lightweight mineral matrix engineered board
Flexural Strength Rupture

Average, dry

Реакция на огонь Non-combustible
Прочность на изгиб

3N/mm² Average, dry

Содержание влаги

3% - 5% (at EMC*).
*EMC=Equilibrium moisture content

Сопротивляемость диффузии паров воды

3.2μ

Прочность при растяжении Longitudinal

1.2N/mm²

Теплопроводность 0.09 W/m°K
Теплопроводность 0.09 W/m°K
Water Absorbency

0.77g/cm³

Щелочность

9pH (approximate)

Прочность на изгиб

3N/mm² Average, dry

Прочность при изгибе по длине плиты

3N/mm²

Сопротивление сжатию

5.5N/mm² (perpendicular to the surface)

Dry Density

500kg/m³

Nominal Dry Density

500kg/m³

Краткое описание Non-combustible lightweight mineral matrix engineered board
Flexural Strength Rupture

Average, dry

Реакция на огонь Non-combustible
Прочность на изгиб

3N/mm² Average, dry

Содержание влаги

3% - 5% (at EMC*).
*EMC=Equilibrium moisture content

Сопротивляемость диффузии паров воды

3.2μ

Прочность при растяжении Longitudinal

1.2N/mm²

Теплопроводность 0.09 W/m°K
Теплопроводность 0.09 W/m°K
Water Absorbency

0.77g/cm³

EMC = Equilibrium moisture content

< #Back#
Реакция на огонь Non-combustible
Обработка

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

Утилизация отходов Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.
Реакция на огонь Non-combustible
Обработка

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

Утилизация отходов Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

< #Back#

Гарантия качества

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Гарантия качества

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

< #Back#

Обработка

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

Обработка

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.